Description

Wire ID Stickers For Model Railways. Know What Every Wire Under Your Baseboard Does.

Pre-cut wrap-around wire labels for layout wiring. Peel a label, wrap the coloured band once round the wire, and press the two printed ends together. It makes a neat flag that reads from both sides, with a colour band on the wire you can spot at a glance. They go straight onto wires that are already soldered in place, with nothing to thread on and no tools needed. Label both ends of every wire and fault finding, re-wiring and taking boards apart for exhibitions become far quicker and easier.

Two Sizes On Every Sheet:

• Small - 12 x 9mm flag, for hook-up wire and droppers up to approx. 1.9mm over the insulation (e.g. 7/0.2 and 16/0.2). 50 per sheet
• Large - 15 x 11mm flag, for bus wire up to approx. 2.9mm (e.g. 24/0.2 and 32/0.2). 8 per sheet

Three Sheets:

• Bus & Power - 11 x BUS+ and 11 x BUS− small, 4 x BUS+ and 4 x BUS− large, plus pairs of DCC, DC, AC, 12V, 16V AC, 5V, 0V, PSU, COM, ACC, LIGHTS, SIGNAL, ISO and FROG
• Points & Sections - pairs of Points PT1 to PT12, Sections S1 to S12 and FROG, plus large DCC, 12V, 16V AC and PSU
• Write-On - blank labels for your own text (use a fine permanent marker)

Labels come in pairs, one for each end of the wire. Colour coded for quick identification: red = DCC/Bus +, black = Bus −, orange = power, green = points, blue = sections, purple = accessories, yellow = frog.

Suitable For All Scales - OO, N, TT:120, O and HO layouts all use the same wire, so these labels work on any layout, DCC or DC.

Printed on white vinyl and precision cut. Designed and made in the UK by West Hill Wagon Works.

Specifications

• Manufacturer: West Hill Wagon Works